Return Grade Food Tru- Trainer
For the alignment of the return side of the Belt. The system retorno grado alimenticio TRU-TRAINER makes use of a unique and highly effective positioning action that does not damage the cobands Conveyor and to lean in if the cobands Conveyor comienza a salirse de su centro. Debido a que no depende del contacto con el borde de la banda para guiarla, se evita así dañar dicho extremo de la banda, algo muy frecuente en el caso de otros sistemas de alineación.
TRU- TRAINER has special cones (similar to those of a crown-type polea) on the external edges that make the drum of the TRU- TRAINER gire sobre un eje interno de pivoteo vertical. El eje de pivoteo interno central es perpendicular a la cinta, lo que hace que la acción de posicionamiento permanezca siempre en el mismo plano horizontal que la banda. Debido a ello, TRU- TRAINER It also works well with reversible and vaiven conveyors.
The bearing compartment is located at both ends of the roller to provide support in all its length, ensuring a vibration-free concentric rotation. Each TRU- TRAINER uses a pair of 6017 2RS bearings to facilitate the design (internal movement of the axis inside the inner shirt), and therefore it is perfectly within its RPM and load specifications, allowing for the alignment of Conveyor Belts with speeds exceeding 7 m / s The central pivot axis is unique and simple, and consists of a stainless steel pin within a solid, sealed soft steel central axis for life.
Benefits:
- Easy installation and low maintenance. By permanently aligning the Belt towards the center of the transporter, reduces damage to the edges, spills and improves the operation performance of the entire transporter.
- Design for heavy work. 3-7 / 16 ″ bearings, 1 ¼ axis»with a hot vulcanised abrasion-resistant rubber-coated roller. Ceramic and urethane coverings are also available.
- It works on the top or bottom deck of the Belt.
- Total Satisfaction Guarantee. To solve alignment problems and make the conveyor system operate more efficiently.
Principios de operación:
- The beauty of this patented system worldwide is its simplicity. The crown-shaped roller has a pivot in the center that rotates laterally on exactly the same plane that uses the Belt.
- As Belt starts moving out of its central axis the chaflanada edge (slightly convex shape, crown type) comes into contact. Due to the lower diameter at the edges a change of forces occurs, making the Tru- Trainer pivot forward to the same side to which the Belt, which naturally makes the next meters of Belt first contact the opposite end by focusing the Belt.
- The Tru- Trainer should be installed with its perpendicular mends at the advance of the Belt, in order to ensure that the pivot turns the roller forward and back instead of up or diagonal.
