Bucket screws
Turnips
The screws used to ensure the kangilon to the Belt, must be installed properly and with appropriate dimensions. The best known are those with a flat, hazelnut head. They must have good diameter or large surface area, thus reducing the possibility that the screw passes through the Belt. Although the diameter of the pulleys of the elevators is defined, the minimum recommended diameter of pulleys to use screws of this type is 14. "The kangilon screws with teeth must be of identical characteristics of the flat screw; the stripes are inserted into the cobands ENL, thus preventing it from rolling when the kangilons are being installed or removed.
Rhinestones
They are sometimes used between the kangilon and the Belt for the following purposes:
- They allow the Belt is more easily approached to the curvature of the polea, thus partially reducing the pressure.
- They act as a shock absorber by absorbing the "shake" that occurs by passing through the pulleys.
- They serve as spacers to reduce the accumulation of fine, dry materials between the kangilons and the Belt.
- They help seal the holes of the screws in the Belt against moisture and fine materials.
Poultry
They are used in cases where severe wear occurs or where high temperature conditions exist to prolong the life of the Belt. Belt used, resistant to the transported material, can be used as a pad, and acts as an insulator between the Belt And the kangilon when the elevator handles hot materials.
In high temperature applications (above 60 ° C), a pad, packaging or foil can be inserted between the kangilon and the area of contact with the Belt, and washers on the heads of the screws to reduce the heat drive towards the Belt.
