Tiger-Tuff-ID
Bucket, high-performance industrial
The bucket Tiger-Tuff-ID it is designed for industrial applications that require high strength, longer service life and good load capacity. Its construction incorporates a lip front, a back wall and corners of greater thickness, characteristics that contribute to prolong the useful life of the bucket and to improve their performance in operating conditions are demanding.
The spacing standard corresponds to two times its projection.
The most common applications include cement, aggregates, aluminum, clay, sand, sawdust, asphalt, sugar, clay, bauxite, lime, limestone, concrete, coal, waste, fertilizers, phosphate, gravel, iron ore, gold, stones, glass dust, chemicals, silica, salt, wood chips, gypsum, and plaster.
Features
- Walls of greater thickness.
- Lip reinforced for excavation work.
- Reinforced corners.
- Higher carrying capacity.
- Download clean and efficient.
- High resistance to abrasion and impact.
- Non-corrosive and does not produce sparks.
Benefits
- Helps to extend the service life of the bucket.
- You can increase the capacity of the elevator.
- Helps to reduce maintenance needs.
- Contributing to the decrease stops associated with the wear and tear.
- This can promote a more efficient operation in demanding industrial applications.
- May represent a lower-cost alternative to address specific bucket metal, depending on the application.
Other considerations
- Holes: The buckets are manufactured without holes. Can be supplied perforations special accordance with the requirements of the client.
- Ventilation: Available in accordance with the needs of the application. See the options of ventilation available for this type of bucket.
- Bucket excavation: In applications where there is a material stuck or hardened in the boot of the elevator, can be used buckets, metal digging slightly larger to help loosen the material, and reduce the abrasion of the buckets, plastic post. Your installation may be performed, depending on the application, every 5 or 10 buckets.
- Spacing: See the table of available sizes to check the spacing standard. Depending on the conveyed material, the speed and the conditions of operation, can be used to a greater or lesser spacing between buckets.
- Installation: Use screws grade 1 standard or Sabre-Tooth for installation on the band lift. These elements are designed to work with flat washers, lock washers and locking nut. If the buckets are to be installed on a system of string, use hex head bolts, nuts and washers are suitable for this type of mounting.
- Adapter plates: Recommended for applications with mounts by string.
- FDA: The buckets are manufactured in polyethylene and urethane high density may be available under specifications FDA for applications that require direct contact with food products.
Applications
The Tiger-Tuff-ID is an alternative to elevators that handle abrasive materials and require a bucket rugged industrial conditions demanding.
Its design can be used in processes related to cement, aggregates, minerals, fertilizers, coal, sand, glass, salts, and other bulk materials.
Do you need to select the bucket suitable for your elevator?
Our technical team can analyze the material transported, the level of abrasion, the required capacity and the operating conditions to recommend the bucket and the band lift suitable for your application.