Tiger-Tuff
Bucket of maximum performance
The bucket Tiger-Tuff it is designed for applications that require high strength, longer service life and reduction of the costs associated with the maintenance. Its construction incorporates greater thickness lip in the front, the back wall, and the corners, which helps to improve their resistance to wear and tear and prolong its duration in operation.
The spacing standard corresponds to the projection of nominal +2”. For a single row of buckets, the recommended width of the band lift is the actual width of the bucket, plus 2 inches.
The most common applications include barley, beans, coffee, corn, seeds, flour, fertilizers, food products, grains, malt, mineral, nuts, oats, potassium, rice, salt, sugar, wheat, and other agricultural and light industrial. Is a suitable alternative for applications that require high capacity, wear resistance, and ongoing management of bulk materials.
Profile option under Tiger-Tuff
The bucket Tiger-Tuff-LP incorporates a reduction in its height that allows you to install a greater number of buckets per meter band. When you use this configuration, it is necessary to re-evaluate the power requirement of the elevator due to the potential increase in capacity.
Features
- Thicker walls and lip reinforced for excavation work.
- Greater thickness on the rear wall and in the corners.
- Higher carrying capacity.
- Download clean and efficient.
- High resistance to abrasion and impact.
- Non-corrosive and does not produce sparks.
Benefits
- Helps to extend the service life of the bucket.
- You can increase the capacity of the elevator.
- Helps to reduce maintenance needs.
- Contributing to the decrease stops associated with the wear and tear.
- Corrosion-resistant.
- Available in materials suitable for applications that require compliance with FDA.
Other considerations
- Holes: The buckets are manufactured without holes. Can be supplied perforations special accordance with the requirements of the client.
- Ventilation: Available in accordance with the needs of the application. See the options of ventilation available for this type of bucket.
- Bucket excavation: In applications where there is a material stuck or hardened in the boot of the elevator, can be used buckets, metal digging slightly larger to help loosen the material, and reduce the abrasion of the buckets, plastic post. Your installation may be performed, depending on the application, every 5 or 10 buckets.
- Spacing: See the table of available sizes to check the spacing standard. Depending on the conveyed material, the speed and the conditions of operation, can be used to a greater or lesser spacing between buckets.
- Installation: Use screws grade 1 standard or Sabre-Tooth for installation on the band lift. These elements are designed to work with flat washers, lock washers and locking nut. If the buckets are to be installed on a system of string, use hex head bolts, nuts and washers are suitable for this type of mounting.
- Adapter plates: Recommended for applications with mounts by string.
- FDA: The buckets are manufactured in polyethylene and urethane high density may be available under specifications FDA for applications that require direct contact with food products.
Materials available
The bucket Tiger-Tuff can be available in various materials and configurations in accordance with the characteristics of the product to be transported, the level of abrasion, impact, and the particular conditions of operation.
See the table of available materials and the technical data sheet to select the appropriate alternative for your lift system.
Do you need to select the bucket suitable for your elevator?
Our technical team can analyze the material transported, the capacity, the speed of the elevator and the operating conditions to recommend the bucket and the band lift suitable for your application.